Hardware fittings are widely used in all aspects of our life, such as furniture, bathroom, kitchen and so on. Due to the special material and characteristics of hardware fittings, they are susceptible to problems such as oxidation, corrosion and rust, which not only affects their aesthetics, but also may shorten their service life. In order to help you better maintain and use the hardware, the following are some hardware maintenance methods and the introduction of the use of precautions.
First, furniture hardware maintenance methods and precautions:
Cleaning: Use a damp cloth dipped in neutral detergent or cleaner to gently wipe the surface of the hardware fittings, then dry the water stains with a dry cloth. Avoid placing high temperature items directly on the furniture hardware fittings, you should use a kickstand or heat insulating pad to avoid damaging the surface.
Treating stains and scratches: For severe stains and scratches, gently rub the surface with fine sandpaper (400-500) and then wipe clean with a dishcloth.
Prevent damage: Avoid using sharp or hard objects to scratch the surface of furniture hardware fittings, and also avoid contact with hydrochloric acid, table salt, salt brine and other substances.
Keep it dry: Keep the surface of the hardware clean and dry to avoid water retention.
Lubrication: Regularly lubricate metal rails, hinges, hinges and other components with lubricant to keep them smooth and fluid.
Second, bathroom hardware maintenance methods and precautions:
Avoid collision: Bathroom hardware has a smooth and delicate surface and should avoid collision with metal objects or items that may damage the surface. When moving the product, hold it gently and avoid placing the faucet directly on hard objects.
SURFACE PROTECTION: Spray the surface of the shower with automotive wax and wipe with a dry cloth to maintain the brightness of the shower.
Cleaning method: use water or neutral cleaner to wipe the surface of the bathroom hardware fittings, and then dry with a dry, soft cotton cloth. Avoid using items with burrs to wipe the surface of the faucet, do not let the faucet come into contact with acid or alkali liquids, and do not directly wipe the surface of the faucet with a wet towel.
Third, kitchen hardware maintenance methods and precautions:
Prevent stains: avoid spilling condiments such as salt, sugar, soy sauce, vinegar, etc. directly on the surface of the hardware, and if an accident occurs, it should be wiped clean immediately.
Hinges and drawers: oil the hinges regularly to keep them flexible and avoid moisture and rust; when opening and closing drawers, avoid excessive force to prevent the slides from falling off or being hit; for large hardware fittings, pay attention to their rotational and tensile directions and avoid using excessive force.
Pot maintenance: iron or stainless steel pots and pans after use, should be cleaned with detergent or water, and then steamed dry internal moisture, and finally coated with a layer of cooking oil to prevent rust.
Cooktop Cleaning: After cooking, clean the surface of the cooktop that has been left greasy. Brush lightly with a soft damp cloth moistened with cleaner and use a wire brush to clean the burners. After cleaning, make sure the cooktop is completely air-dried before using it.
Sink maintenance: stainless steel sink cleaning avoid using steel wire ball, chemicals or steel brush scrubbing, should use a soft towel or soft cloth for cleaning. For sinks made of other materials, use cleaners to remove oil and keep the sink clean. Timely cleaning of the pipe part of the filter, so as not to accumulate too much grease and scale.
These are the maintenance methods and precautions for using common hardware fittings for furniture, bathrooms and kitchens. By following these guidelines, we can better protect and extend the service life of hardware fittings. At the same time, reasonable use and maintenance of hardware fittings can also make our life more convenient and comfortable. We hope this information is helpful to you!
